Time Zone/Daylight Saving Time Data Assignment - NEC UNIVERGE SV9300 Networking Manual

TIME ZONE/DAYLIGHT SAVING TIME DATA ASSIGNMENT

To enable remote connection of stations regardless of nation and area with multiple time zone, do the fol-
lowing programming.
START
CM0B Assign the Location number to each Unit.
NOTE 1:
NOTE 2:
CM67 Assign the Time Zone to the location number
assigned by CM0B Y=1XX>10.
2nd Data
A2345
A2330
A2315
A2300
A0100
A0045
A0030
A0015
NONE
NOTE 1:
NOTE 2:
A
DESCRIPTION
This data is available when location
number is not assigned by CM12
Y=39, 50.
When standard SIP terminal is ac-
commodated, assign location num-
ber for VoIPDB by this command.
+15 minute increments
Time Zone
System Clock +23:45
System Clock +23:30
System Clock +23:15
System Clock +23:00
System Clock +01:00
System Clock +00:45
System Clock +00:30
System Clock +00:15
No Time Zone (No time
difference)
System clock should be assigned by CM02.
After changing the data, system data copying to Remote Unit by CMEC Y=8 is required.
Chapter 3 REMOTE UNIT OVER IP FEATURES
TIME ZONE/DAYLIGHT SAVING TIME DATA ASSIGNMENT
• Y=1XX (VOIP Port [1] + Unit No. [02-50])
(1) 10
(2) 00-63
NONE : Location No. 00
• Y=10
(1) 00-63: Location No. 00-63
(2) Time Zone (See the table below)
NONE : No Time Zone
2nd Data
B0015
B0030
B0045
B0100
B2300
B2315
B2330
B2345
CCC
3-33
DATA
: Location No. 00-63
-15 minute increments
Time Zone
System Clock -00:15
System Clock -00:30
System Clock -00:45
System Clock -01:00
System Clock -23:00
System Clock -23:15
System Clock -23:30
System Clock -23:45
Time Zone data clear
NWA-088654-001 Rev.1.0
94ch3001.fm