Call Forwarding-All Calls-Ccis / Multiple Call Forwarding-All Calls-Ccis - NEC UNIVERGE SV9300 Networking Manual

CALL FORWARDING-ALL CALLS-CCIS /
MULTIPLE CALL FORWARDING-ALL CALLS-CCIS
General Description
This feature permits all calls destined for a particular station to be routed to another station or to an Atten-
dant Console, in another office in the CCIS network, regardless of the status (busy or idle) of the called
station. The activation and cancellation of this feature may be accomplished by either the station user or
an Attendant.
Programming
START
CM12 Assign Service Restriction Class A to the re-
quired stations.
CM15 Allow Call Forwarding-All Calls and Call For-
warding-All Calls-Outside in Service Restric-
tion Class A assigned by CM12 Y=02.
NOTE:
CM20 Assign an access code for Call Forwarding-All
Calls Set and Cancel respectively.
CM35 To apply this feature to incoming calls, assign
trunk route combinations for the tandem con-
nection.
CM36 Allow the tandem connection to the incoming/
outgoing trunk route.
A

CALL FORWARDING-ALL CALLS-CCIS / MULTIPLE CALL FORWARDING-ALL CALLS-CCIS

DESCRIPTION
When providing Call Forwarding-
All Calls-Outside, set "1" (Allow)
for Y=000, Y=026 of CM15.
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=000 Call Forwarding-All Calls
• Y=026 Call Forwarding-All Calls-Outside
(1) 00-15: Service Restriction Class A
assigned by CM12 Y=02
(2) 1 : Allow
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A010: Call Forwarding-All Calls Set
A011: Call Forwarding-All Calls Cancel
• Y=005
(1) 00-63: Trunk Route No.
(2) 1 : Release Signal arrives
• Y=0
(1) XX ZZ
XX: 00-63: Incoming Trunk Route
ZZ : 00-63: Outgoing Trunk Route
(2) 0: Allow
1-85
Chapter 1 CCIS FEATURES
DATA
NWA-088654-001 Rev.1.0
94ch1003.fm