PROGRAMMING PROCEDURE
For the Remote UNIT over IP data, there are three types of system data as shown below.
Program the system data according to each of programming procedure.
• System data set to the CPU blade of Main Unit
(1)
Data for Main Unit Operation
(2)
Data for Remote Unit Operation
• System data set to the CPU blade of Remote Unit
• System data set to the CPU blades both of Main Unit and Remote Unit
(1)
VoIPDB Data
NOTE:
LAN Data for Main Unit and Remote Unit must be set to the CPU blades both of Main Unit
and Remote Unit when an additional Remote Unit is installed.
Chapter 3 REMOTE UNIT OVER IP FEATURES
3-23
PROGRAMMING PROCEDURE
NOTE
NWA-088654-001 Rev.1.0
94ch3001.fm