Calling Number Display-Ccis - NEC UNIVERGE SV9300 Networking Manual

CALLING NUMBER DISPLAY-CCIS

General Description
This feature permits the number of a calling or called party at another switching office to be displayed ei-
ther on a Multiline Terminal or an Attendant Console.
To transfer the calling party number received from the network (ISDN CPN/Caller-ID/T1-ANI) transpar-
ently between the offices on the CCIS network, assign the following data.
The calling party number sent from the network over CCIS can be displayed on the LCD of the station of
another office over CCIS, and can be sent to the SMDR. It can also be sent to the MCI, if the system pro-
vides the MCI with ANI.
ISDN CPN/
Caller-ID/
T1-ANI
Programming
START
CM08 Provide the system with Caller ID Display fea-
ture for CCIS calls for Office A and B.
Specify the duration of displaying the caller in-
formation when the incoming/outgoing call is
answered by the destination via CCIS.
A
Office A
Calling Party Number
DESCRIPTION
Office B
CCIS
Transparent
(1) 379
(2) 1 : To provide
(1) 580
(2) 0 : 6 seconds
1 : Until call is finished
1-116
Chapter 1 CCIS FEATURES
CALLING NUMBER DISPLAY-CCIS
Display of
Calling Party
Number on LCD
Sending of
Calling Party
Number to
MCI/SMDR
DATA
NWA-088654-001 Rev.1.0
94ch1003.fm