SV9300 TELEPHONE USER GUIDE
KEYS & LAMPS
1.
Handset - Used for sending/receiving voice
2.
Exit - Exit from a screen mode by pressing this key
3.
Speaker - Originate a call with hands free
4.
Dial Key Pad - Dial the called party number of feature access
code
5.
Hold - Place a call on hold
6.
Transfer - Allows the user to transfer established calls to another
user
7.
Speaker Key (with light) - Control the built-in speaker for hands
free dialing or monitoring
8.
Cursor - Access various features with simple operation. Use the
"Up" or "Down" key to scroll to the item
9.
Menu - Access the Menu of terminal
10.
Mic Key (with light) - Respond hands free. LED lights during
speakerphone operation
11.
Feature Key (with light) - Activate features such as terminal
setup and to program one-touch speed calling keys.
12.
Answer Key (with light) - When THE LED on this key is lit, press
this key to answer the incoming call
13.
Recall Key - Finish a call and hear the dial tone to make another
call
14.
Programmable Keys - These keys can be programmed as flexible
line key/programmable (with light) feature key by system
administrator.
15.
Soft Keys - The feature name is shown at the bottom of the LCD.
The appropriate feature key is displayed on the screen according
to the call handling process.
16.
Help - Call up explanations of the soft keys on the LCD
17.
USB Port (Back) - Connect USC device for charging, etc.
18.
LCD - Display date or dialed number, etc.
19.
Call Indicator Lamp - When using VOICEMAIL, the lamp lights
when a message has been left
1