Dual Hold-Ccis - NEC UNIVERGE SV9300 Networking Manual

DUAL HOLD-CCIS

General Description
This feature allows two connected Multiline Terminals to be placed on hold simultaneously over the CCIS
link. This enables the held parties to answer or originate a call from a secondary extension or the idle prime
extension.
Programming
START
CM12 Assign Service Restriction Class B to the re-
quired stations.
CM15 Allow Dual Hold in Service Restriction Class
B assigned by CM12 Y=02.
END
Operating Procedure
To operate Dual Hold-CCIS from a Multiline Terminal:
1. The user at Station A presses the Hold key; the user at Station B is placed on hold.
2. The user at Station B presses the Hold key; the user at Station A is placed on hold.
3. Dual Hold-CCIS is now in progress.
DESCRIPTION
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
ZZ: 00-15 : Service Restriction Class B
• Y=064
(1) 00-15: Service Restriction Class B
assigned by CM12 Y=02.
(2) 1 : Allow
1-174
Chapter 1 CCIS FEATURES
DUAL HOLD-CCIS
DATA
NWA-088654-001 Rev.1.0
94ch1005.fm