Unit Number For Remote Unit Assignment - NEC UNIVERGE SV9300 Networking Manual

UNIT NUMBER FOR REMOTE UNIT ASSIGNMENT

Assign the following data to each CPU blade of Remote Units.
START
CM0B Assign the Unit number for Remote Unit to
each Remote Unit.
NOTE 1:
NOTE 2:
NOTE 3:
END
DESCRIPTION
OFF LINE
This command should be set in each
Unit.
The registration/clear of this data is
available only in off-line mode.
Set the SENSE switch of the CPU
blade to "0" when operating the
Unit as Unit No. "05-50" (for
Remote Unit). The Unit functions as
the Unit No. set by this data.
Chapter 3 REMOTE UNIT OVER IP FEATURES
UNIT NUMBER FOR REMOTE UNIT ASSIGNMENT
• Y=000
(1) 90
(2) 05-50
NONE : Unit No. 01
3-41
DATA
: Unit No. for Remote Unit
NWA-088654-001 Rev.1.0
94ch3001.fm