Call Back-Ccis - NEC UNIVERGE SV9300 Networking Manual

CALL BACK-CCIS

General Description
This feature provides inter-office Call Back. A station that has dialed a busy station at another office can
set Call Back-CCIS by dialing a feature access code. When this feature has been set, the setting station will
ring as soon as the busy station becomes available.
Programming
START
CM12 Assign Service Restriction Class A to the re-
quired stations.
CM15 Allow Call Back in Service Restriction Class
A assigned by CM12 Y=02.
CM20 Assign the access code for Call Back.
CM90 Assign a Call Back key to the Multiline Termi-
nal, if desired.
END
DESCRIPTION
• Y=02
(1) X-XXXXXXXX: Station No.
(2) XX ZZ
XX: 00-15 : Service Restriction Class A
• Y=003
(1) 00-15: Service Restriction Class A
assigned by CM12 Y=02
(2) 1 : Allow
• Y=0-3 Numbering Plan Group 0-3
(1) X-XXXX: Access Code
(2) A004: Set
A005: Cancel
• Y=00
(1) My Line No. +
(2) F0004: Trunk Queuing-Outgoing/Call
Back
1-82
Chapter 1 CCIS FEATURES
CALL BACK-CCIS
DATA
,
+ Key No.
NWA-088654-001 Rev.1.0
94ch1003.fm