Toro REELMASTER 3100-D Operator's Manual page 5

28. Check performance of all interlock switches daily.
Do not defeat the interlock system. It is for your
protection.
29. To ensure the entire machine is in good operating
condition, frequently check and keep all nuts, bolts,
screws and hydraulic fittings tight.
30. Make sure all hydraulic line connectors are tight,
and all hydraulic hoses and lines are in good
condition before applying pressure to the system.
31. Keep your body and hands away from pin hole
leaks or nozzles that eject hydraulic fluid under
high pressure. Use paper or cardboard, not hands, to
search for leaks. Hydraulic fluid escaping under
pressure can have sufficient force to penetrate your
skin and do serious damage. If fluid is injected into
your skin it must be surgically removed within a
few hours by a doctor familiar with this form of
injury or gangrene may result.
32. Before disconnecting or performing any work on
the hydraulic system, all pressure in the system
must be relieved by stopping the engine and
lowering the cutting units to the ground.
33. If major repairs are ever needed or if assistance is
desired, contact an Authorized Toro Distributor.
34. To reduce potential fire hazard, keep the engine area
free of excessive grease, grass, leaves and
accumulation of dirt.
35. If the engine must be running to perform a
maintenance adjustment, keep hands, feet, clothing,
and any other parts of the body away from the
cutting units and any moving parts. Keep everyone
away.
36. Do not overspeed the engine by changing governor
settings. To assure safety and accuracy, have an
Authorized Toro Distributor check maximum engine
speed with a tachometer.
37. The engine must be shut off before checking the oil
or adding oil to the crankcase.
To insure optimum performance and safety, use genuine
TORO replacement parts and accessories. Replacement
parts and accessories made by other manufacturers could
be dangerous, and such use could void the product
warranty of The Toro Company.
Safety
5