Toro REELMASTER 3100-D Operator's Manual page 21

Maintenance
Maintenance Procedure
Inspect the air filter, Dust Cup and
Burp Valve
Lubricate all grease fittings
Change the engine oil
Check battery fluid level
Check battery cable connections
Check alternator fan belt tension
Change the engine oil and filter
Inspect the Traction Belt
Replace the air filter
Replace the hydraulic filter
Torque the wheel lug nuts
Replace the hydraulic fluid
Replace the fuel/water separator filter
Replace the fuel pre-filter
Inspect traction cable movement
Inspect the spider coupling for wear
‡Check engine RPM (idle and full throttle)
Adjust valves
Initial break in at 8 hours
‡Initial break in at 50 hours
Replace moving hoses
Replace safety switches
Fuel tank—drain and flush
Hydraulic tank—drain and flush
Cooling system—drain and flush
Daily Maintenance Checklist
Safety interlock operation
Brake operation
Engine oil &fuel level
Cooling system fluid level
Drain water/fuel separator
Air filter, dust cup and burp
Radiator & screen for debris
Unusual ongine noises
Unusual operating noises
Hydraulic system oil level
Maintenance Schedule
Maintenance Interval & Service
Every 50 Every
hours 100
hours
Items are recommended every 2000 hours
or 2 years, whichever occurs first.
Every Every
200 400
hours hours
Recommendations
Hydraulic hoses for damage
Fluid leaks
Fuel level
Tire pressure
Instrument operations
Reel-to-bedknife adjustment
Height-of-cut adjustment
Lubricate all grease fittings
Touch-up damaged paint
Every
800
hours
21