Mitsubishi Electric 800 Series Instruction Manual page 68

• Fault history
Register Definition
40501 Fault record 1
40502 Fault record 2
40503 Fault record 3
40504 Fault record 4
40505 Fault record 5
40506 Fault record 6
40507 Fault record 7
40508 Fault record 8
40509 Fault record 9
40510 Fault record 10
• Product profile
Register Definition
44001 Model (1st and 2nd characters)
44002 Model (3rd and 4th characters)
44003 Model (5th and 6th characters)
44004 Model (7th and 8th characters)
44005 Model (9th and 10th characters)
44006 Model (11th and 12th characters)
44007 Model (13th and 14th characters)
44008 Model (15th and 16th characters)
44009 Model (17th and 18th characters)
44010 Model (19th and 20th characters)
44011 Capacity (1st and 2nd characters) Read
44012 Capacity (3rd and 4th characters)
44013 Capacity (5th and 6th characters)
NOTE
• When a 32-bit parameter setting or monitor item is read and the value to be read exceeds HFFFF, HFFFF is returned.
Read/write
Read/write
Read
Read
Being 2 bytes in length, the data is stored as H00○○.
Read
Refer to the lowest 1 byte for the error code. (For details on error codes,
Read
refer to the list of fault displays in the FR-E800 Instruction Manual
(Maintenance).)
Read
The fault history is batch-cleared by writing to register 40501.
Read
Set any value as data.
Read
Read
Read
Read/write
Read
Read
Read
Read
The model name can be read in ASCII code.
Read
"H20" (blank code) is set for blank area.
Example) FR-E820-EPA :
Read
H46, H52, H2D, H45, H38, H32, H30, H2D, H45, H50, H41, H20...H20
Read
Read
Read
Read
The capacity in the inverter model can be read in ASCII code.
Data read is displayed in increments of 0.1 kW (rounded down to one
Read
decimal place).
"H20" (blank code) is set for blank area.
Read
Example) 0.75K: "
Remarks
Remarks
7" (H20, H20, H20, H20, H20, H37)
2. Ethernet Communication
1
2
3
4
5
6
7
8
9
10
67
2.7 MODBUS/TCP