Mitsubishi Electric MELSEC iQ-R Series User Manual page 431

User frame specification
Set the system setting value for data communication using a user frame.
Item
On-demand user Start frame No.
frame specification designation (nth)
Final frame No.
designation (nth)
User frame User frame use
specification for enable/disable
receiving designation
Start frame No.
designation (nth)
Final frame No.
designation (nth)
Send user frame CR/LF output
designation designation
Output start pointer
designation
Output quantity
designation
Send frame number
designation (nth)
User frame User frame
receiving method receiving method
designation designation (nth)
Method 1 dedicated
receive end data
quantity designation
(nth)
Description
Sets the user frame number to be used.
Sets the user frame number to be used.
Sets whether or not a user frame is used for data communication.
Sets the user frame number to be used.
Sets the user frame number to be used.
Sets whether or not CR/LF is transmitted.
Sets the head position in the transmission frame number designation area to
which the registration number of the user frame to be transmitted is written.
Sets the number of user frame to be transmitted from the designated position in
the output start pointer designation area.
Sets the user frame number to be transmitted from the designated position in the
output start pointer designation area in the order of output.
Sets the receive format of a user frame.
Sets the number of word/byte in the arbitrary data portion at the time of data
reception using the user frame receive method 1.
Setting range
0000H to 801FH
(Default: 0000H)
0000H to 801FH
(Default: 0000H)
• Not use
• Use
(Default: Not use)
0000H to 801FH
(Default: 0000H)
0000H to 801FH
(Default: 0000H)
• Do not send
• Send
(Default: Do not send)
0 to 100
(Default: 0)
0 to 100
(Default: 0)
0000H to FFFFH
(Default: 0000H)
• Method 0
• Method 1
(Default: Method 0)
0000H to FFFFH
(Default: 0000H)
26 PARAMETER SETTING
26.2 Module Parameters
26
429