Appendix 2
This section explains the input/output signals of C24.
The input/output signal assignments in the table below are when the start I/O number of C24 is '0000'.
The devices starting with X indicate input signals from a C24 to CPU module.
The devices starting with Y indicate output signals from a CPU module to C24.
Do not output (turn ON) the signals of "Use prohibited" in the input/output signal list shown below.
If any of the "Use prohibited" signals is output, the programmable controller system may malfunction.
Input/Output Signal List
APPENDICES APPENDIX
Appendix 2 Input/Output Signal List
A
493