Mitsubishi Electric MELSEC iQ-R Series User Manual page 327

(3) Set CR/LF to "Do not send".
Set the send pointer to 1.
Set the output quantity to 5.
Set an arbitrary send data.
Set an arbitrary send data in send area.
Set the send user frame.
(101) Set normal completion flag.
(103) Set abnormal completion flag.
Normal end
D0 Transmission data count (0004H)
D1 (3412H)
Transmission data
D2 (AB56H)
D5 Transmission frame No. (03F2H)
D6 (03F3H)
D7 (8001H)
D8 (8000H)
D9 (041BH)
D10 (0000H)
D11 (0001H)
Interface No.
D12 Transmission result (0000H)
D13 CR/LF output (0000H)
D14 Output head pointer (0001H)
D15 Output counter (0005H)
15.5 Application Program for Data Transmission using a Combination that does not Specify the Start Frame
Abnormal end
Transmission data count (0004H)
(3412H)
Transmission data
(AB56H)
Transmission frame No. (03F2H)
(03F3H)
(8001H)
(8000H)
(041BH)
(0000H)
(0001H)
Interface No.
(other than 0000H)
Transmission result
CR/LF output (0000H)
Output head pointer (0001H)
Output counter (0005H)
15 DATA COMMUNICATIONS USING USER FRAMES
15
325