TDU Troubleshooting Tables and Status LEDs
Processor Board Status LEDs
Revision A
Troubleshooting: TDU Troubleshooting Tables and Status LEDs
See the tables below to aid in troubleshooting problems identified by the
status LEDs, or reported in the TDU event and error codes.
Remove the shroud and e-box cover to view the processor board status
LEDs.
When power is applied to the e-box, the LEDs will turn on very
!
quickly in sequence, starting at DS6 and going to DS1.
If self-calibration has never been performed, the LEDs will stay on
!
until the self-calibration routine is performed.
If self-calibration has been performed, the LEDs will all turn off and
!
then behave as described in the table below.
When power is removed from the e-box, all LEDs will turn on until
!
the system has completed the shutdown routines.
GE T2100 Treadmill
2021403-031
B
B
Status LEDs
6-15