Walking Belt and Board Replacement
Walking Belt Replacement Instructions
Loosen Left Tension Bolt
Remove Right Tension
Bolt and End Cap
Revision A
Assembly/Disassembly: Walking Belt and Board Replacement
1. Turn the power switch off, disconnect the power cord from the wall
outlet, and remove the shroud.
NOTE
You do not have to remove either roller to replace the belt.
2. Loosen the tension bolt on the left end cap.
3. Remove the tension bolt and the right end cap.
4. Loosen the keeper nut on the right foot, and unscrew and remove the
right foot.
GE T2100 Treadmill
2021403-031
Remove Right Foot
024
7-9