Drive Belt Replacement and Adjustments
Replace the Drive Belt
Drive Belt Adjustments
Adjust Drive Belt Tension
2 Upper Motor Mounting
Bolts
7-16
Assembly/Disassembly: Drive Belt Replacement and Adjustments
1. Turn the power switch off, disconnect the power cord from the wall
outlet, and remove the shroud.
2. Remove the front roller as described in
on page 7-6.
3. Loosen the 4 motor mounting bolts and use the 2 drive belt
adjustment bolts to lower the motor and loosen the drive belt tension.
4. Remove the old belt and replace with a new belt.
5. Replace the front roller and adjust the drive belt tension. See
Drive Belt Tension"
1. There are two drive belt tension adjustment bolts above the DC
motor. Tighten these 1/2-inch bolts to adjust the drive belt tension
(clockwise to tighten).
GE T2100 Treadmill
2021403-031
on page 7-16.
Drive Belt Adjustment
Bolts 2 Places
2 Lower Motor Mounting
Bolts (underneath the
motor)
"Front Roller Replacement"
"Adjust
Revision A
033