Drive Controller Status LED
Revision A
Troubleshooting: TDU Troubleshooting Tables and Status LEDs
The drive controller fault status LED is located underneath the X6
connector on the Drive Controller. Remove the shroud to view the LED.
Drive Controller Fault
Status LED
LED Status
Solid Green
Drive enabled, normal operation.
Flashing
Firmware download in progress.
Green
Solid Red
Drive is disabled, but no errors are latched.
Alternating
Undervoltage warning (no AC power to the X1 connector), but no errors
Red/Green
are latched.
Flashing
GE T2100 Treadmill
2021403-031
Description
6-21