Mitsubishi Electric MELSEC Q Series Reference Manual page 50

2 SYSTEM CONFIGURATION
2 - 17
(4) Applicable modules
The Q series modules can be used on remote I/O stations.
Note that some modules have restrictions.
(a) Functional restrictions
The use of interrupt pointers and dedicated instructions for intelligent
function modules are not supported.
For the restrictions of functions for each module, refer to the user's manual
for the module used.
(b) No. of mountable modules
Module Name
QJ71E71-B5, QJ71E71-B2,
QJ71E71-100, QJ71E71
QJ61BT11N, QJ61BT11
Modules other than those listed above
1: The module with function version B or later is available.
(5) Units/modules not applicable
The following units/modules cannot be used on remote I/O stations.
Item
Redundant type extension base unit
AnS series extension base unit
CC-Link IE Controller Network module QJ71GP21-SX, QJ71GP21S-SX
CC-Link IE Field Network master/local
module
MELSECNET/H module
Web server module
MES interface module
AS-i master module
High speed data logger module
High speed data communication
module
Interrupt module
1: These modules cannot be used when switched to interrupt modules by
turning off the function selecting switch (SW2).
(6) ERR. contact of the power supply module
The operation of the ERR. contact of the power supply module differs depending
on the combination with the base unit used. For the operation of the ERR.
contact, refer to the QCPU User's Manual (Hardware Design, Maintenance and
Inspection).
No. of mountable modules
Up to 4
1
Up to 4
Up to 64
Module model name
Q65WRB
QA1S65B, QA1S68B, QA65B, QA68B
QJ71GF11-T2
QJ71LP21, QJ71LP21-25, QJ71LP21S-25,
QJ71LP21G, QJ71BR11, QJ71NT11B
QJ71WS96
QJ71MES96
QJ71AS92
QD81DL96
QJ71DC96
QI60, QX40H 1, QX70H 1, QX80H 1, QX90H
MELSEC-Q
1
2 - 17