Available Device Ranges - Mitsubishi Electric MELSEC Q Series Reference Manual

2 SYSTEM CONFIGURATION

2.2.3 Available device ranges

2 - 6
(2) Table 2.4 lists the setting items that can be set on a remote I/O module operating
as a remote I/O station (R) and the parameter setting items that can be set from
GX Developer.
Table 2.4 Setting Items of a Remote I/O Station
Setting item
Network module main module switch
STATION NO.
MODE
GX Developer parameter setting
PLC system
PLC RAS
I/O assignment
Operation setting
Ethernet setting
CC-Link setting
Remote password setting
GX Configurator setting
Initial setting
Auto refresh setting
: Always set,
5 : Refer to the User's Manual (Function Explanation, Program Fundamentals) for
the CPU module used.
6 : Refer to the Q Corresponding Ethernet Interface Module User's Manual (Basic)
(SH-080009). Note that interrupt setting is not available.
7 : Refer to the MELSEC-Q CC-Link System Master/Local Module User's Manual
(SH-080394E). Note that interrupt setting is not available.
The remote I/O network can use the following ranges of devices inside network
modules.
Device Available Range
LB 0 to 3FFF
H H
LW 0 to 3FFF
H H
LX 0 to 1FFF
H H
LY 0 to 1FFF
H H
0
CPU module B/W
LB/LW
Network module
CPU module X/Y
Actual I/O
Network module LX/LY
: Default setting,
(16384 points)
(16384 points)
(8192 points) The device range (excluding that of I/O module
mounted on the host station) should be assigned to
(8192 points)
each network module.
1000
H
(4096)
1: Expandable by changing from [PLC parameters] - [Device settings]
MELSEC-Q
Remote I/O station (R)
1 to 64
: Set as needed, : No need to set
Others
—
2000 3000
H H
(8192) (12288)
Extended
: Available device range
Reference
Section 4.2.2
Section 4.2.2
5
5
5
Section 5.1.2
6
7
Section 7.12
Section 5.2.1(4)
Section 5.2.1(4)
3FFF
H
(16383)
1
2 - 6