Mitsubishi Electric MELSEC Q Series Reference Manual page 235

6 PROGRAMMING
No.
6 - 40
(13) Setting a link dedicated instruction and checking the processing
result
With link special relays (SB) and link special registers (SW), link dedicated
instructions can be set and the processing results can be checked.
1) Link dedicated instructions can be set with the following link special
registers (SW).
• Number of retries (SW001C)
• Retry interval (SW001D)
• Number of gates (SW001E)
2) Processing results of the send/receive instructions are stored in the
following link special registers (SW).
• Send/receive instruction (1) processing result (SW0031)
• Send/receive instruction (2) processing result (SW0033)
• Send/receive instruction (3) processing result (SW0035)
• Send/receive instruction (4) processing result (SW0037)
• Send/receive instruction (5) processing result (SW0039)
• Send/receive instruction (6) processing result (SW003B)
• Send/receive instruction (7) processing result (SW003D)
• Send/receive instruction (8) processing result (SW003F)
Description
—
No.
SW001C Number of retries
SW001D Retry interval
SW001E Number of gates
Send/receive instruction (1) processing
SW0031
result
Send/receive instruction (2) processing
SW0033
result
Send/receive instruction (3) processing
SW0035
result
Send/receive instruction (4) processing
SW0037
result
Send/receive instruction (5) processing
SW0039
result
Send/receive instruction (6) processing
SW003B
result
Send/receive instruction (7) processing
SW003D
result
Send/receive instruction (8) processing
SW003F
result
MELSEC-Q
Description
6 - 40