Replacing An Mdu - Huawei PDU8000 User Manual

PDU8000 Modular Integrated PDC V1.0
User Manual
Verify that the new circuit breaker is switched to OFF before the installation.
Figure 8-11 Removing copper bars
Step 6 Install the new circuit breaker using the circuit breaker extracting kit, and close the handles on
both sides of the hot-swap base.
Figure 8-12 Installing the new circuit breaker
Put the circuit breaker extracting kit back in the file box on the PDF front door.
Step 7 Reinstall the panel on the PDC.
----End

8.4.3 Replacing an MDU

Prerequisites


Issue 07 (2019-04-15)
Tools required: a Phillips screwdriver and the PDC door key.
Materials required: the new MDU is intact.
Copyright © Huawei Technologies Co., Ltd.
8 Operation and Maintenance
80