Huawei PDU8000 User Manual page 64

PDU8000 Modular Integrated PDC V1.0
User Manual
Main Second-Level
Menu Menu
Alarm
Settings
Issue 07 (2019-04-15)
Third/Fourth-Level
Menu
Route 2 RT Curve
Route 3 RT Curve
Route 4 RT Curve
Main energy Inq.
Branch Energy Inq.
Active Alarm
Historical Alarm
a
Buzzer Off/Open
Twinkle
Common
Communi IP address
cation assign
IP address
Subnet mask
Gateway
modbus
baudrate
modbus ID
Enable SSL
Encryption
Copyright © Huawei Technologies Co., Ltd.
7 MDU Commissioning Guide
Function
each branch.
Queries the energy yield of each
main circuit and branch circuit.
Displays the No., severity, name,
ID, and generated time of active
alarms. A maximum of 1000
alarms can be recorded.
Displays the No., severity, name,
ID, generated time, and cleared
time of historical alarms. A
maximum of 2500 alarms can be
recorded.
Disables or enables the buzzer.
N/A
Sets the system language, date
format, year, month, day, time
zone, time, password, password
complexity check, contrast,
luminance, and saturation.
IP address assign can be set to
Automatic (DHCP) or Manual.
In automatic assignment mode,
the PDU8000 automatically
obtains the IP address, subnet
mask, and gateway address. In
manual assignment mode, you
can modify the IP address, subnet
mask, and gateway address.
This parameter is required when
the PDU8000 connects to the
management system using
Modbus. It can be set to 4800,
9600, or 19200.
This parameter is required when
the PDU8000 connects to the
management system using
Modbus. The value ranges from 1
to 127.
SSL encryption can be enabled or
disabled.
Preset
Value
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
9600
1
Enable
57