Replacing An Indicator - Huawei PDU8000 User Manual

PDU8000 Modular Integrated PDC V1.0
User Manual

Fuse
FU1–FU3
FU4
FU5–FU6
FU7–FU9
Procedure
Step 1 Open the cover and remove the fuse, as shown in the following figure.
Figure 8-18 Replacing a fuse
Step 2 Install a new fuse, push the cover, and connect the fuse terminal.
----End

8.4.6 Replacing an Indicator

Prerequisites


Issue 07 (2019-04-15)
When an electricity meter is configured
Description
Fuses of yellow, green, and red indicators respectively
Power supply fuse of the electricity meter
Fuses of the power board
Voltage detection fuse of the electricity meter
The figures are for reference only. The actual product appearance prevails.
Tools required: an electrical tester pen, a pair of insulation gloves, a Phillips screwdriver,
the PDC door key, a multimeter, and a step ladder.
Materials required: a spare indicator of the same model is available and functional.
Copyright © Huawei Technologies Co., Ltd.
8 Operation and Maintenance
85