Sony FVS-1000 Series Operation Manual page 9

Display block
1 SOURCE button
2 SOURCE SOURCE
display window
DESTINATION
3 DESTINATION
button
4 DESTINATION
display window
1 SOURCE button
Selects the data displayed in the SOURCE display
window. At present, only the film counter can be
displayed.
2 SOURCE display window
Shows the film position.
3 DESTINATION button
Selects the data displayed in the DESTINATION
display window.
4 DESTINATION display window
Shows the timecode of the video signal. The displayed
data are selected with the DESTINATION button.
During menu operation, the set values are displayed.
5 SYSTEM ERROR indicator
Lights when a system error occurs.
6 ALARM indicator
Lights when a hardware error occurs.
7 WARNING indicator
Lights when an error occurs.
...........................................................................................................................................................................................................
1) Function not available now
5 SYSTEM ERROR
indicator
6 ALARM indicator
7 WARNING
indicator
8 SELECT
button
SELECT
SYSTEM ERROR
PRESET
9 PRESET
ALARM
RESET
WARNING
button
DF
HOUR MIN SEC FRAME
0 RESET
button
qa Menu
display
window
qs Mode
display
block
1)
1)
8 SELECT button
While you hold this button pressed, the rightmost digit
of each the SOURCE and DESTINATION display
windows shows the code that indicates the data
displayed in the window.
9 PRESET button 1)
Presets the data shown in the SOURCE and
DESTINATION display windows.
0 RESET button
Resets the data shown in the SOURCE and
DESTINATION display windows.
qa Menu display window
Menus selected with the buttons in the menu operation
block appear here.
qs Mode display block
Settings of the mode corresponding to the number
displayed in the MODE display window appear here
when the MENU button is not lit.
7