Sony FVS-1000 Series Operation Manual page 35

AUDIO menu
Item
AUDIO
LIPSYNC
EXTERNAL DELAY
MAINTENANCE
TEST TONE
DELAY
EQUALIZER
OUTPUT LEVEL
Low-pass filter
-10k
-15k
-20k
-25k
(dBfs)
-30k
-35k
-40k
-45k
-50k
-55k
4k 5k 6k 7k
Setting(s)
Select whether the audio function is to be used or not.
To use, set to ON.
Perform fine adjustment of lip sync.
The adjustable range is from –2.0 frames to +2.0 frames in 0.1-
frame steps. Adjusting to a negative value advances the
playback timing, and adjusting to a positive value retards the
playback timing.
Output of the audio signal is delayed according to the video
signal delay caused by using an external processor.
The adjustable range is from 0 frame to 15 frames in 1-frame
steps.
The test signal is turned ON or OFF. When set to ON, a sine
wave of 1 kHz (+4 dBu for an analog signal, –20 dBFS for a
digital signal) is oscillated.
Set to ON for normal operations.
For internal adjustment, set to OFF to disable the delay
function.
Set the use of an equalizer and its characteristics.
CUT: To use a low-cut filter and select a cut-off frequency.
The adjustable range is from 8.0 kHz to 16.0 kHz (10 steps).
The characteristics for each cut-off frequency are shown
below.
OFF: To not use any equalizer
BOOST: To use a slit-loss compensation equalizer and to
select characteristics. The adjustable range is from +1 to +40.
The characteristics are shown below.
Perform fine adjustment for each Lch (left channel) and Rch
(right channel) output. The adjustable range is from –6.0 dB to
+6.0 dB in 0.1-dB step.
CUT
Max
8k 9k 10k 20k
(Hz)
CUT
Slit-loss compensation equalizer
-0k
-5k
-10k
Off
-15k
(dBfs)
-20k
CUT
Min
-25k
-30k
-35k
-40k
-45k
4k 5k 6k
Mode Operation
No.
30 25 20
35
40
15
10
5
7k 8k 9k 10k
(Hz)
BOOST
No.
OFF
20k
33