Sony FVS-1000 Series Operation Manual page 36

Menu Operations
FUNCTION menu
Item
WIPE
H WIPE
SRC A, SRC B
BORDER
MIX
MIX
SRC A, SRC B
INPUT CHECK
FRAME MEMORY
BANK
STORE SRC
EXE
34
Setting(s)
Select a wiping pattern.
Select an output from among HD, SD1, and SD2.
Select wiping direction.
OFF: No wipe
H WIPE: Horizontal wipe
V WIPE: Vertical wipe
Select a source picture A/B
MAIN: The main picture
EXT: A picture from external equipment
MEM: A picture stored in a memory bank
Adjust the border of horizontal wiping using the leftmost control
knob.
Adjust the border of vertical wiping using the second control
knob from the left.
Select an output from SD1, and SD2.
Set the external key to OFF or EXT.
For INPUT, select 4:2:2:4 or 4:4:4:4. Then the external key
signal is assigned to LINK B.
Select a background picture (SRC A) and a foreground picture
(SRC B).
MAIN: The main picture
EXT: A picture from external equipment
MEM: A picture stored in a memory bank
Check an input signal.
For details on checking an input signal, see "Checking an Input
Signal."
Select an output from among HD, SD1, and SD2, and select an
input signal.
OFF: Normal
EXT INPUT: For checking an external input signal
MEM: For checking a signal stored in memory
Load and store the data in frame memory.
Select an output from among HD, SD1, and SD2.
For details on loading and storing data, see "Loading and
Storing Data."
Select a memory bank from 0 to F (SD) or 0 to 3 (HD) from
which the data are to be loaded.
Select the source of data to be stored in a memory bank.
MAIN: The main picture
EXT INPUT: A picture from external equipment
Press the SET button, and the picture data are stored in a
memory bank.
Mode Operation
No. No.
50 2 3 4 5
6 7 9
51 2 3 4 5
6 7 9