Specifications - Sony FVS-1000 Series Operation Manual

Multi resolution film scanner
Hide thumbs Also See for FVS-1000 Series:
Table of Contents

Advertisement

Specifications

General
1175 × 1798 × 780 mm
Dimensions (w/h/d)
3
(46
/
8
Mass
Approx. 650 kg (1433 lb)
Power requirements
for the Unites States and Canada:
AC 120 V, 50/60 Hz
for the other countries:
AC 220 to 240 V, 50/60 Hz
Power consumption
for the Unites States and Canada:
30 A, 15 A for outlet
for the other countries:
17 A, 8 A for outlet
Film transport system
Film format
35 mm and Super 35 mm (4&3
perforation)
Optional:
35 mm anamorphic
Optional:
16 mm, Super 16 mm
Film type
Negatives, Prints, Inter positives
Film gate
3&4 perf. 35 mm film gate
Optional:
16 mm film gate
Film capacity
Max. 2500 ft.
Film core type
2 inch, 3 inch and 5 inch for 35 mm
2 inch, 3 inch and 5 inch for 16 mm
Film drive
Sprocket driven by AC servo
motors
Supply and take-up reel driven by
AC servo motors
Film drive lock-up time
2 film frame from stand-by ON
(Still) to Play
Film frame rate
23.976, 24, 24.975, 25, 29.97, 30 Fps
forward and reverse mode
Step mode
Single step forward and reverse
mode
Stop mode
True Still frame mode
Shuttle mode
Max. 5 times normal playback speed
at 35 mm Film
Max. 7 times normal playback speed
at 16 mm Film
Variable mode
±2 times normal playback speed
35 mm film maximum perforation vertical repositioning
2)
capability range
±50 µm at film plane
35 mm film vertical framing
Adjustment of vertical framing by
single perforation step in forward
and reverse mode
...........................................................................................................................................................................................................
1) The two inner sprocket provide intermittent motion
during playback, and provides continuous motion during
shuttle. The two outer sprockets permanently provide
continuous motion.
× 71
× 30
1
3
/
/
inches)
4
4
1)
Film image acquisition system
Image acquisition device
3-chip 2 million pixels Hyper HAD
FIT area CCD
(3@1920 × 1080 frame array)
Light source
Xenon lamp 300 W
Diffuser
Integrating sphere
Lens
35 mm zoom lens
Optional:
35 mm anamorphic conversion lens
Optional:
16 mm prime lens
Lens control
Remote motorised servo control for
Iris, Focus and Zoom (if available)
ND filter
Clear,
CC filter
Cross, 3200K, 4300K, 6300K
CCD block movement
Horizontal:
24 mm at 35 mm film plane
Horizontal:
12 mm at 35 mm film plane
Vertical:
28 mm at 35 mm film plane
Vertical:
14 mm at 35 mm film plane
Rotation:
210 degree
Electronic 180 deg rotation
only when HD Zoom OFF
Primary color correction system
Optical gain control
R, G and B independent intensity
control
Electrical gain control R, G, B and Master
Pedestal range
R, G, B and Master
White/black shading
Para and Saw independent
horizontal, vertical and R, G, B
Gamma control
Negative, Print and Inter positive
pre-setting with coarse and fine
control
Saturation control
–∝ to +3 dB
Luminance control
–∝ to +3 dB
Sampling rate and quantization
3 @ 12-bit logarithmic R/G/B
independent @ 74 MHz
2) 16 perforation averaging system. When these 16
perforation pitch errors include ±50 µm on the film, OPS
corrects ±10 µm film image.
1
1
1
/
ND,
/
ND,
/
ND
4
16
64
37

Advertisement

Table of Contents
loading

Table of Contents