Sony FVS-1000 Series Operation Manual page 38

Menu Operations
TEST menu
Item
SYSTEM
USER FACTORY
USER0
USER1
SHADING
WHITE BLACK
VSAW
VPARA
HSAW
HPARA
SERVO
PTR
AIR BLOW
OPS
V, H
PANEL
MONITOR
LED CHK
KEY CHK
LCD LIGHT
36
Setting(s)
Load the factory setting data.
Load and save the user setting data.
Load and save the user setting data.
Adjust the SHADING of the telecine system according to the
integrating sphere. The adjustment value is stored internally.
(It is not included in USER data such as FACTORY.)
To select WHITE or BLACK, press the cursor up or down
button to make the selected color blink, then press the cursor
left or right button.
R (red): Adjust VSAW of red.
G (green): Adjust VSAW of green.
B (blue): Adjust VSAW of blue.
R (red): Adjust VPARA of red.
G (green): Adjust VPARA of green.
B (blue): Adjust VPARA of blue.
R (red): Adjust HSAW of red.
G (green): Adjust HSAW of green.
B (blue): Adjust HSAW of blue.
R (red): Adjust HPARA of red.
G (green): Adjust HPARA of green.
B (blue): Adjust HPARA of blue.
Set the PT roller settings.
AUTO: The PT rollers touch the film during playback.
ALL: The PT rollers always touch the film.
OFF: The PT rollers do not touch the film.
ON: Air is output while film is running.
OFF: Air is not output.
ON: Controlling the OPS vertically (V) or horizontally (H).
OFF: OPS does not work.
Select a picture displayed on a display window from SD1 or
SD2.
ON: All lamps light.
ON: The name of the pressed button appears on the display
window.
EXIT: Press the CMD2 and the
Adjust the brightness of the menu display window using the
leftmost control knob.
buttons simultaneously.
Mode Operation
No. No.