Sony FVS-1000 Series Operation Manual page 19

To change the PAD assemblies
Change the PAD assemblies on the supply and take-up
sides.
Note
The PAD assemblies have been adjusted for each
model. Never use PAD assemblies for a different
model.
1
Loosen the two fixing screws by turning them
counterclockwise 90 degrees.
Fixing screws
2
Remove the PAD assembly by pulling it out.
PAD assembly
Positioning pins
3
Align the positioning pins and holes, then attach
the PAD assembly by pushing it in.
4
Fasten the fixing screws by turning them
clockwise.
To set the film stoppers
Figures printed on the knob of the film stopper indicate
film sizes. Turn the knob 180 degrees so that the same
figures as the film size to be used appear. Be sure to
set all four stoppers for the same film size.
3 5
17