Mode Operations - Sony FVS-1000 Series Operation Manual

Menu Operations

Mode Operations

Some menu items can be set or controlled in the mode
block on the control panel. Mode numbers
corresponding to menu items are shown in the tables in
"Menu Items."
The mode number is shown in the MODE display
window, and the settings for the selected mode number
are shown in the mode display block in the menu
display window.
MODE display window
MODE button
MEMORY button
KEY INHIBIT
1
ON OFF MASTER
MODE MEMORY
MODE
2
SOURCE
3
FUNCTION EXECUTE
4 f
F
EXECUTE button
buttons
1 2 3 4 buttons
Selecting a mode number
To select a lower digit
Press the button to increment the digit, or the
button to decrement the digit.
º
To select an upper digit
Press the FUNCTION and
to increment the digit, or the FUNCTION and
buttons simultaneously to decrement the digit.
Setting data
Required operations depend on the mode number.
For details on operations required for each mode are listed
in the tables in "Menu Items."
To set the data (Operation 1)
1
Select the mode number.
2
Press the MODE button to select the setting.
24
Control knobs
RED GREEN BLUE
PAN TILT ZOOM ROTATION
IRIS FOCUS ZOOM
buttons simultaneously
3
Press the EXECUTE button.
To control the level (Operation 2)
1
Select the mode number.
2
Select a video output channel if necessary.
3
Turn the control knobs.
To select a video output channel (Operation
3)
Press the 1, 2, 3, or 4 button.
To execute function (Operation 4)
Press the EXECUTE button.
To select the input source A (Operation 5)
Press the SOURCE button.
To select the input source B (Operation 6)
Press the FUNCTION and SOURCE buttons
simultaneously.
To swap the input A to input B (Operation 7)
Press the CMD2 and SOURCE buttons
simultaneously.
To select the subitem shown by a decimal
point to the right of the digit (Operation 8)
Press the MODE button. Each time you press the
MODE button, the mode number changes like [1 1 ],
[1 1.], [1.1 ], and [1.1.].
To retrieve an initial value (undo) (Operation
9)
Press the CMD2 and FUNCTION buttons
simultaneously.
To retrieve a default value (Operation 0)
Press the CMD1 and FUNCTION buttons
simultaneously.