Control Of The Axis From The Step 7 Program - Siemens SINAMICS S120 Faq

SINAMICS S120 at Technology CPU Entry ID: 21767896
10.
11.
7.2.2

Control of the axis from the STEP 7 program

After creating the axis in the S7T Config configuration tool and after loading
the configuration to the technology CPU, this axis can be activated via the
respective technology function blocks from the S7 Tech block library in the
STEP 7 program.
Figure 7-2 S7 Tech V2.0 block library
V1.0
Commissioning SINAMICS S120
Finish the creation of the axis by
clicking the Finish button.
The technology object Axis is now
completely created and can be used
and addressed in the controller.
Edition 10/28/05
Control of SINAMICS S120
52/58