Siemens SINAMICS S120 Faq page 16

SINAMICS S120 at Technology CPU Entry ID: 21767896
No.
10.
11.
12.
If a message indicating inconsistency is displayed during saving and
Note
compiling the configuration, you have to set the times Ti and To to
values which are a multiple of the time base in the slave
synchronization of the constant bus cycle time of Profibus.
V1.0
Connection Establishment to SINAMICS S120
Instruction
Edition 10/28/05
Requirements
Note
Leave the settings for Default
Telegram at the default settings.
Set the equidistant Profibus cycle
for SINAMICS S120 and possibly
apply the suggested settings.
Click the Alignment button to
transfer the suggested settings to
the Profibus nodes.
Save and compile the
configuration by clicking the
respective button and exit HW
Config.
16/58