Seat Adjustments - Toro Groundsmaster 4000 Operator's Manual

Lift Switches
The lift switches raise and lower the cutting units
(Figure 5). Press the switches forward to lower the
cutting units and rearward to raise the cutting units.
When starting the machine, with the cutting units in
the down position, press the lift switch down to allow
the cutting units to float and mow.
Note:
The cutting units do not lower while in the
high-speed range and they do not raise or lower if you
are out of the seat while the engine is running. Also,
the cutting units lower with the key in the O
and you are in the seat.
Cruise-Control Switch
The cruise-control switch locks in the pedal position
to maintain the desired ground speed
Pressing the rear of the switch turns off the cruise
control, the middle position of the switch enables the
cruise-control function, and the front of the switch sets
the desired ground speed.
Note:
Pressing either brake pedal or moving the
traction pedal into the reverse position, for 1 second,
also disengages the pedal position.
1. Power-point switch
Power-Point Port
Use the power-point port to power optional electrical
accessories (Figure 6).

Seat Adjustments

Seat-Adjustment Lever
Move the seat-adjustment lever on the side of the
seat outward, slide the seat to the desired position,
and release the lever to lock the seat into position
(Figure 7).
position
N
(Figure
Figure 6
2. Cruise-control switch
6).
1. Weight gauge
2. Weight-adjustment lever
3. Seat-adjustment lever
Armrest-Adjustment Knob
Rotate the knob to adjust the armrest angle.
Note:
The adjustment knob is located under the
armrest.
Seat-Back-Adjustment Lever
Move the lever to adjust the seat-back angle
7).
Weight Gauge
g028454
The weight gauge indicates when the seat is adjusted
to the weight of the operator
height by positioning the suspension within the range
of the green region.
Weight-Adjustment Lever
Use this lever to adjust to the proper weight of the
operator (Figure
the air pressure and push down to decrease the air
pressure. The proper adjustment is correct when the
weight gauge is in the green region.
17
Figure 7
4. Seat-back adjustment
lever
5. Armrest-adjustment knob
(not shown; located under
arm rest)
(Figure 7). Adjust the
7). Pull up the lever to increase
g008837
(Figure