Setup; Greasing The Machine; Checking The Tire Pressure - Toro Groundsmaster 4000 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
Media and Additional Parts
Description
Operator's Manual
Engine owner's manual
Declaration of Conformity
Note:
Determine the left and right sides of the
machine from the normal operating position.
1

Greasing the Machine

No Parts Required
Procedure
Grease the machine before use; refer to
(page 58).
Important:
Failure to properly grease the
machine will result in premature failure of critical
parts.
Description
No parts required
No parts required
No parts required
Production-year decal
Lubrication
Qty.
–
–
–
1
Qty.
1 Review before operating the machine.
1 Use to reference engine information.
1
2

Checking the Tire Pressure

No Parts Required
Procedure
Check the tire pressure; refer to
Pressure (page
Important:
ensure a good quality-of-cut and proper machine
performance. Do not underinflate the tires.
14
Use
Grease the machine.
Check the tire pressure.
Check the fluid levels.
Install the decal (CE Machines Only).
Use
Checking the Tire
27).
Maintain pressure in all tires to