Toro Groundsmaster 4000 Operator's Manual page 22

If you changed the PIN code and forgot the code,
contact your authorized Toro distributor for assistance.
1. From the M M
AIN
scroll down to the S
right button (Figure
2. In the S
ETTINGS
scroll down to the P
the right button (Figure
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 12B and
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(Figure 12D).
Wait until the red indicator light of the InfoCenter
illuminates.
, use the center button to
ENU
M and press the
ETTINGS ENU
11).
Figure 11
M , use the center button to
ENU
M and press
ROTECTED ENU
12A).
Figure 12
Figure 12C). Repeat this step
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
then to the O
N
You can view and change the settings in the Protected
Menu. Once you access the Protected Menu, scroll
down to Protect Settings option. Use the right button
to change the setting. Setting the Protect Settings to
O allows you to view and change the settings in
FF
the Protected Menu without entering the PIN code.
Setting the Protect Settings to O
options and requires you to enter the PIN code to
change the setting in the Protected Menu. After you
g028523
set the PIN code, rotate the key switch O
to the O position to enable and save this feature.
N
Setting the Auto Idle
1. In the Settings Menu, scroll down to Auto Idle.
2. Press the right button to change the auto idle
time between O
Setting the Maximum Allowed
Mow Speed
•
In the Settings Menu, Scroll down to Mow Speed
and press the right button.
•
Use the right button to increase the maximum full
mow speed (50%, 75%, or 100%).
•
Use the center button to decrease the maximum
full mow speed (50%, 75%, or 100%).
•
Press the left button to exit.
Setting the Maximum Allowed
Transport Speed
•
In the Settings Menu, scroll down to Transport
Speed and press the right button.
g028522
•
Use the right button to increase the maximum
transport speed (50%, 75%, or 100%).
•
Use the center button to decrease the maximum
transport speed (50%, 75%, or 100%).
•
Press the left button to exit.
When finished with the Protected Menu, press the left
button to exit to the Main Menu, then press the left
button to exit to the Run Menu.
22
position locks the protected menu.
hides the protected
N
, 8S, 10S, 15S, 20S, and 30S.
FF
position and
FF
and back
FF