Practical Operations; Maintenance - Mitsubishi Electric AE-200A Instruction Book

4. Practical operations

4-1. Maintenance

4-1-1. CSV output
The operation data, such as charge parameters and power consumption, can be output in a CSV format.
Touch [Maintenance] in the menu bar, and then touch [CSV output].
Note: A separate license may be required to use the CSV output function. Only valid buttons can be selected on the screen.
Note: Use a USB memory device that meets the following conditions.
• Supports USB 2.0
• Formatted with FAT32 or FAT (FAT16)
• Security function is not provided or not required to be set.
Note: Test the USB memory device several times before use and verify that the device functions properly. Reading data from or
writing data to a USB memory device that has not been confirmed to work may cause unexpected problems. (If the data
cannot be output to the USB memory device after a writing error occurs and the device is replaced, reboot the AE-200 (turn
off the power and restart). Do not use the USB memory device that has experienced writing error once.)
Charge Parameters
Important
● The USB memory device may not be recognized if you insert and remove it within a short time. If this happens, reset the
AE-200/AE-50.
(1) Remove the controller cover, and insert a USB memory device to the USB port.
(2) Touch [Charge Parameters] or [Power consumption data] to output, then touch [Output as CSV file].
Note: It may take a few minutes to complete the download, depending on the data volume.
Note: Do not remove the USB memory device while the data is being output. A message will appear when the data output is
complete.
WT07190X01
55
Power consumption data
Output as CSV file