Mitsubishi Electric AE-200A Instruction Book page 77

5-2-7. Groups
Touch [Initial Settings] in the menu bar, and then touch [Groups].
Register the groups of air conditioning units, LOSSNAY units (ventilators), Air To Water (PWFY) units, AHC, HWHP
(CAHV) units, or general equipment to be connected to the AE-200/AE-50, and then touch [Save Settings].
Note: Some settings may not be accessible if logged in as a building manager.
Note: If the system is connected to a TG-2000A, make or change the settings from the TG-2000A.
Note: The [Controller] setting will appear when the [System Exp] setting on the [Unit Info.] screen is set to [Expand]. Switch the
[Controller] setting between [AE200], [AE1], [AE2], and [AE3] to make settings for each AE-200 and AE-50 individually.
Important
● Group settings for the AE-50 must be made with the AE-50 properly connected to ensure proper settings. Those settings
made without the connection of AE-50 will not be reflected.
● The units connected to AE-200 cannot be grouped together with the units connected to AE-50.
Controller
Select [AE200] to make
settings for AE-200, and
select [AE1], [AE2], or [AE3]
to make settings for each
AE-50.
Group No.
Group name
Unit selection
[1] Setting group names
(1) Touch the "Group name" button to display the keyboard. Enter the group name in 20 alphanumeric or symbol
characters or less.
Note: The following characters cannot be used: <, >, &, ", or '
WT07190X01
77
AHC registration
Remote controller
registration
System controller
registration
Save Settings
Touch to save the changes
made.