Mitsubishi Electric AE-200A Instruction Book page 42

[5] Setting the date periods
(1) Touch the "Season Settings" button on the [Floor] or
[Block] display.
Note: If the [Schedule: Season setting] setting on the
[Advanced] screen is set to [Not Available], the "Season
Settings" button will not appear, and seasonal settings
cannot be made.
(2) Enter the date periods in which each weekly schedule
will be effective.
Touch the "Enabled/Disabled" buttons on the left side to
enable or disable each weekly schedule.
: Enabled
: Disabled (default)
Note: Set the [Schedule: Season setting] setting on the
[Advanced] screen to [Available]. (Refer to section 5-2-
12 "Advanced settings" for details.)
Note: When any of the Weekly Schedules 1, 2, 3, 4, and 5
overlap, the schedule with the lower number takes
priority. For example, Weekly Schedule 1 takes
precedence over Weekly Schedule 2.
Note: The date period over the next year (such as 11/01 -
03/31) can be set.
Note: The settings made on this screen on the AE-200 will be
reflected on this screen on the AE-50.
[6] Copying a schedule to another group
(1) To copy the schedule settings of a group to the schedule
settings for another group, select the group whose
schedule settings are to be copied, touch [Copy], select
the group to which the copied schedule settings are to
be pasted, and touch [Paste].
Note: Schedules of a group cannot be copied to a different
type of group. For example, the schedules of an
air conditioning unit group cannot be copied to the
schedules for a LOSSNAY unit group.
Note: The operation mode and set temperature may not
be copied because the available operation modes or
operable set temperature range differ among the units.
WT07190X01
Previous page
42
Season Settings
Enabled/Disabled
Next page
Copy
Paste