Siemens SCALANCE W1780 Configuration Manual page 350

Appendix D
D.1 Messages in the event log
Messages
Overlap-AP found on WLAN X: AP <System
Name> <MAC> found on channel <channel num‐
ber.> <RSSI value>
Overlap-AP aged out on WLAN X: AP <System
Name> <MAC> on channel <channel number.>
<RSSI value>
DFS: Radar interference detected on WLAN X at
channel <channel number.> (frequency <frequen‐
cy> MHz). Changing to channel <channel num‐
ber> (frequency <frequency> MHz)
DFS: channel <channel number> (frequency <fre‐
quency> MHz) aged out from NOL at WLAN X
and can be used again.
DFS: Radar interference detected on WLAN X at
channel <channel number> (frequency <frequen‐
cy> MHz). No more free channels to use!!
Status of the WLAN interface (in client mode only)
Messages
Link up on WLAN X.
Link down on WLAN X.
Messages on configuration
Messages
WBM: Authentication failure.
Telnet: Authentication failure.
Restart requested
Messages about file upload or download
Messages
File upload via HTTP(S): load of FileType <file
type> OK
→ restart required
File upload via HTTP(S): load of FileType<file
type> OK
File upload via HTTP(S): validation of FileType
<file type> IDENTICAL
350
A further access point was detected on the channel set for the WLAN
interface X or on a neighboring channel.
The overlapping access point could not be detected during the configured
aging time and was removed from the "Overlap AP" list.
A primary user (e.g. radar or weather station) was detected on the chan‐
nel set for WLAN interface X or on a neighboring channel. The channel
will be blocked for 30 min. The access point changes to the configured
alternative channel or to the next free channel on which there is no pri‐
mary user.
No primary user detected on the channel any longer. The channel was
removed from the list of blocked channels and can be used again
A primary user was found on all available channels. There is no free
channel available, the WLAN interface X will be deactivated until one of
the channels becomes available.
Description
The WLAN interface X is enabled.
The WLAN interface X is disabled.
Description
When logging in with Web Based Management (WBM), the wrong pass‐
word was entered. The event can be enabled or disabled in "System ->
Events" (Authentication Failure).
When logging in via Telnet, the wrong password was entered. The event
can be enabled or disabled in "System -> Events" (Authentication Failure).
Restart due to a user request. The event can be enabled or disabled in
"System -> Events" (Cold/Warm Start).
Description
Loading the file via HTTP(S) was successful. A restart is required.
Loading the file via HTTP(S) was successful.
Loading the file via HTTP(S) was successful. The file is identical to the
existing file.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03