Siemens SCALANCE W1780 Configuration Manual page 123

Associated stations
The WBM page shows the clients logged on to the access point as well as additional
information, for example status, signal strength, MAC address.
Description
● Associated stations
Shows the number of clients logged on to the access point.
The table has the following columns:
● AID (Associated ID)
Shows the connection ID of the client. If the client connects to the access point via the VAP
interface, the client is assigned a connection ID. The connection ID is unique within a VAP
interface. If two clients log on at different VAP interfaces, both clients can receive the same
ID.
● Radio
Shows the available WLAN interfaces.
● Port
Shows the VAP interface.
● Type
Shows the client type, for example "Sta" stands for IEEE 802.11 standard client.
● MAC Address
Shows the MAC address of the client.
● System Name
Shows the system name of the client if the client communicates this to the access point. Not
all clients support this parameter.
● Channel
Shows the channel over which the client communicates with the access point.
● Signal Strength [dBm]
Shows the signal strength of the connected client in decibel milliwatts.
● Signal strength [%]
Shows the signal strength of the connected client as a percentage.
● Age [s]
Shows the time that has elapsed since the last client activity.
● Security
Shows which authentication method is used.
If the authentication method "Open System + Encryption" or "Shared Key" is used,
"Encrypted (WEP/AES)" is displayed for both authentication methods.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03
Configuring with Web Based Management
6.4 "Information" menu
123