V3 Groups - Siemens SCALANCE W1780 Configuration Manual

3. Select the check box in the required row "Trap".
4. Click the "Set Values" button.
Deleting a trap entry
1. Enable "Select" in the row to be deleted.
2. Click the "Delete" button. The entry is deleted.
6.5.11.3

v3 Groups

Security settings and assigning permissions
SNMP version 3 allows permissions to be assigned, authentication, and encryption at protocol
level. The security level and read/write permissions are assigned according to groups. The
settings automatically apply to every member of a group.
Description
The page contains the following boxes:
● Group Name
Enter the name of the group. The maximum length is 32 characters.
● Security Level
Select the security level (authentication, encryption) valid for the selected group. The
available options are as follows:
– No Auth/no Priv
– Auth/no Priv
– Auth/Priv
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03
No authentication enabled/no encryption enabled.
Authentication enabled/no encryption enabled.
Authentication enabled/encryption enabled.
Configuring with Web Based Management
6.5 "System" menu
185