Siemens SCALANCE W1780 Configuration Manual page 141

● SSH Server
Enable or disable the "SSH Server" service for encrypted access to the CLI.
● SSH port
Specify the port for SSH access to the CLI.
● HTTP server
Enable or disable HTTP access to the WBM.
● HTTP port
Specify the port for HTTP access to the WBM.
● HTTPS server
Enable or disable HTTP access to the WBM.
● HTTPS port
Specify the port for HTTPS access to the WBM.
● DNS Client
Enable or disable the DNS client. You can configure other settings in "System > DNS".
● SMTP Client
Enable or disable the SMTP client. You can configure other settings in "System > SMTP
Client".
● Syslog Client
Enable or disable the Syslog client. You can configure other settings in "System > Syslog
Client".
● DCP Server
Specify whether or not the device can be accessed with DCP (Discovery and Configuration
Protocol):
– "-" (disabled)
– Read/Write
– Read Only
● Time
Select the setting from the drop-down list. The following settings are possible:
– Manual
– SIMATIC Time
– SNTP Client
– NTP Client
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03
DCP is disabled. Device parameters can neither be read nor modified.
With DCP, device parameters can be both read and modified.
With DCP, device parameters can be read but cannot be modified.
The system time is set manually. You can configure other settings in "System > System
Time > Manual Setting".
The system time is set using a SIMATIC time transmitter. You can configure other
settings in "System > System Time > SIMATIC Time Client".
The system time is set via an SNTP server. You can configure other settings in "System
> System Time > SNTP Client".
The system time is set via an NTP server. You can configure other settings in "System
> System Time > NTP Client".
Configuring with Web Based Management
6.5 "System" menu
141