Siemens SCALANCE W1780 Configuration Manual page 284

Configuring with Web Based Management
6.8 Menu "Layer 3 (IPv4)"
● IP Address
Shows the IPv4 address of the subnet.
● Subnet Mask
Shows the subnet mask.
● Address Type
Displays the address type. The following values are possible:
– Primary
– Secondary
● IP Assign Method
Shows how the IPv4 address is assigned. The following values are possible:
– Static
– Dynamic (DHCP)
284
The first IPv4 address that was configured on an IPv4 interface.
All other IPv4 addresses that were configured on an IPv4 interface.
The IPv4 address is static. You enter the settings in "IP Address" and "Subnet Mask".
The device obtains a dynamic IPv4 address from a DHCPv4 server.
SCALANCE W1780/W1740 according to IEEE 802.11ac Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C485-03