Toro Greensmaster 3250-D Operator's Manual page 7

Replaces Decal 136-8506 for CE Machines
Note:
This machine complies with the industry standard
stability test in the static lateral and longitudinal tests with the
maximum recommended slope indicated on the decal. Review the
instructions for operating the machine on slopes in the Operator's
Manual as well as the conditions in which you would operate the
machine to determine whether you can operate the machine in the
conditions on that day and at that site. Changes in the terrain can
result in a change in slope operation for the machine. If possible,
keep the cutting units lowered to the ground while operating the
machine on slopes. Raising the cutting units while operating on
slopes can cause the machine to become unstable.
1. Warning—read the
Operator's Manual;
receive training before
operating the machine.
2. Warning—hearing
protection must be worn.
3. Cutting/dismemberment
hazard of hand or foot,
mower blade—stay away
from moving parts; keep
all guards and shields in
place.
136-8505
4. Tipping hazard—do not
drive across or down
slopes greater than 15
degrees.
5. Thrown object
hazard—keep bystanders
a safe distance away from
the machine.
6. Warning—engage the
parking brake, shut off the
engine, and remove the
ignition key before leaving
the machine.
133-8062
Some or all of these symbols are on your battery.
1. Explosion hazard
2. No fire, open flame, or
smoking
decal136-8505
3. Caustic liquid/chemical
burn hazard
4. Wear eye protection.
5. Read the Operator's
Manual.
decal133-8062
1. Tipping hazard—read the Operator's Manual; always wear
a seat belt when operating; do not remove the rollover
protection system (ROPS).
7
Battery Symbols
6. Keep bystanders a safe
distance away from the
battery.
7. Wear eye protection;
explosive gasses can
cause blindness and other
injuries.
8. Battery acid can cause
blindness or severe burns.
9. Flush eyes immediately
with water and get medical
help fast.
10. Contains lead; do not
discard
115-8226
decalbatterysymbols
decal115-8226