Replacing The Fuel Filter; Inspecting The Fuel Lines And Connections - Toro Greensmaster 3250-D Operator's Manual

2-wheel drive traction unit
Hide thumbs Also See for Greensmaster 3250-D:
Table of Contents

Advertisement

Replacing the Fuel Filter

Service Interval: Every 800 hours
1.
Close the fuel shutoff valve
the fuel tank.
Figure 37
1. Fuel shut-off valve
2.
Clean the area where the filter canister mounts.
3.
Place a drain pan under the fuel filter.
4.
Open the filter drain plug and breather valve
(Figure
38).
Figure 38
1. Breather valve
2. Fuel filter
5.
Remove the filter canister and clean the
mounting surface.
6.
Lubricate the gasket on the filter canister with
clean oil.
7.
Install the filter canister by hand until the gasket
contacts the mounting surface, then rotate an
additional 1/2 turn.
8.
Tighten the drain plug on the bottom of the filter
canister and open the fuel shut off valve.
(Figure
37) below
g008434
g254461
3. Filter drain plug
9.
Dispose of the fuel and filter according to local
regulations.
Inspecting the Fuel Lines
and Connections
Service Interval: Every 2 years
Inspect the fuel lines for deterioration, damage, or
loose connections.
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

04384

Table of Contents