Toro Greensmaster 3250-D Operator's Manual page 20

Raise/Lower Mow Control
Moving the control (Figure
operation lowers the cutting units and starts the reels.
Pull back on the control to stop the reels and raise
the cutting units. To stop the reels without raising the
cutting units, pull back on the control momentarily
and releasing it. Start the reels by moving the control
forward.
High Temperature Override Button
If the engine shuts off because it is overheated, press
the override button (Figure
can move the machine to a safe location and allowed
to cool down.
Note:
When using the override button, you must hold
it down continuously to operate. Do not use it for
extended periods of time.
Backlap Lever
Use the backlap lever
mow control lever and the reel speed control for
backlapping the reels.
Figure 21
1. Backup lever
Reel-Speed Control
Use the reel-speed control
speed of the reels.
20) forward during cutting
20) in and hold it until you
(Figure 21) with the raise/lower
2. Reel-speed control
(Figure 21) to adjust the
Seat-Adjustment Lever
The seat-adjustment lever on the left side of the seat
(Figure 22) allows an 18 cm (7 inch) foreward and
rearward adjustment of the seat.
1. Seat-adjustment lever
Fuel-Shutoff Valve
Close the fuel-shutoff valve
tank, when storing or transporting the machine on a
truck or trailer.
g008432
1. Fuel-shutoff valve (under the fuel tank)
20
Figure 22
(Figure 23), under the fuel
Figure 23
g008433
g008434