Security Features; Access Security; User-Specific Logon For Wbm - Siemens HiPath 3000 Series Service Documentation

service.fm
Service

Security Features

12.7 Security Features
12.7.1

Access Security

12.7.1.1

User-Specific Logon for WBM

To ensure that authorized users have access to the HiPath 3000/5000 and to prevent unautho-
rized access, users must be identified by a user name and authorized by a password. This ap-
plies to all local and remote administration and maintenance procedures using Web-Based
Management (WBM).
The user group determines which data is administered. The following two user groups are per-
manently defined for administration via WBM:
Customer
●
Administrator
●
Each user group is assigned a fixed user name and password. You need a valid user name
and password to access a user group. Only the data authorized for the relevant user group can
be read and administrated.
The following table provides a breakdown of the two user groups and their rights for each of
the setup wizards.
Table 12-9 WBM User Groups with Associated Rights
Initial Installation
(for basic system setup)
New Components:
(for configuring new components)
LAN telephones (for configuring additional IP work-
●
points)
WLAN telephones (for configuring additional WLAN
●
workpoints)
Analog telephones (for configuring additional analog
●
workpoints - group 3 fax devices, for example)
Not for U.S.: S0 interfaces (for configuring additional
●
ISDN connections and ISDN workpoints)
Licensing (for licensing system expansions)
●
Change Feature:
(for modifying current system setup data)
12-110
Wizard
Nur für den internen Gebrauch
Customer
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Administrator
X
X
X
X
X
X