Siemens HiPath 3000 Series Service Documentation page 1042

service.fm
Service
Guided Maintenance
Table 12-7 HiPath 3000 Class B Error Messages
No. HiPath 3000/
5000 Manager E:
Event Log Entry
12-002 bus_error
12-003 address_error
12-004 illegal_instruction Interrupt Illegal In-
12-005 zero_division
12-006 Invalid opcode
12-007 TRAP V Instruc-
tions
12-008 Privilege Violation Privilege Violation Create a trace.
12-009 Trace
12-010 Line 1010 Emula-
tor
12-011 Line 1111 Emula-
tor
12-68
Meaning
Interrupt Bus Error Create a trace.
Interrupt Address
Error
struction
Interrupt Zero Divi-
sion
Invalid Opcode Ex-
ception
TRAPcc, TRAP V
Instructions
Trace
Line 1010 Emula-
tor
Line 1111 Emula-
tor
Required Measures
Create a stack dump.
Save a snapshot.
In the case of HiPath 3550
or HiPath 3500, this prob-
lem may be caused by a
software error –> Upgrade
required.
Create a trace.
Create a stack dump.
Save a snapshot.
Create a trace.
Create a stack dump.
Save a snapshot.
Create a trace.
Create a stack dump.
Save a snapshot.
Create a trace.
Create a stack dump.
Save a snapshot.
Create a trace.
Create a stack dump.
Save a snapshot.
Create a stack dump.
Save a snapshot.
Create a trace.
Create a stack dump.
Save a snapshot.
Create a trace.
Create a stack dump.
Save a snapshot.
Create a trace.
Create a stack dump.
Save a snapshot.
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch
Note