Siemens HiPath 3000 Series Service Documentation page 1191

Nur für den internen Gebrauch
Table A-3 Expert Mode Codes
Code
22 29
22 30
22 31
22 32
22 33
22 34
22 34 1
22 34 2
22 35
22 35 1
22 35 2
22 36
22 37
22 38
22 38 1
22 38 1 01 Assistant: 0 = inactive, 1 = active
22 38 1 09 HW: 0 = inactive, 1 = active
22 38 1 12 Processor: 0 = inactive, 1 = active
22 38 1 15 APSXF: 0 = inactive, 1 = active
22 38 1 16 General: 0 = inactive, 1 = active
22 38 1 20 CP: 0 = inactive, 1 = active
22 38 1 21 DH: 0 = inactive, 1 = active
22 38 1 23 Network: 0 = inactive, 1 = active
22 38 1 26 Presence 0 = inactive, 1 = active
22 38 1 28 Recovery: 0 = inactive, 1 = active
22 38 1 29 IO Process: 0 = inactive, 1 = active
22 38 1 30 LW: 0 = inactive, 1 = active (0 to n)
22 38 1 11 LW date: 0 = inactive, 1 = active (41 to n)
22 38 2
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
System Programming Codes (Expert Mode Codes)
Feature Identification Number (FIN) for Conference (for U.S. only)
Feature Identification Number (FIN) for Drop (for U.S. only)
MSN default: 0 = off, 1 = on
DTMF hidden: 0 = off, 1 = on
Announcement with connection: 0 = denied, 1 = allowed
MFC-R2 parameters
Ringback protection
DID digits
Common hold
By hanging up
Without hanging up
Switch line, DSS: 0 = no, 1 = yes
(Status 1 = U.S., Status 0 = Rest of World (ROW)
Advisory call 0 = off, 1 = on
Trace stop facility
Stop trace
(error 19 cannot be set to inactive)
Reset 1 = Delete all, 2 = System default
Accessing system administration
Function
pcodes.fm
A-19